Categories
3U smart100 touch screen 51.2V 100ah lithium battery pack 5KWh 48V lithium battery solar battery f
BK100 is a 48V 100Ah lifepo4 battery pack with BYDC47 cell, touch screen design, capacity of 5KWh for energy storage between home solar energy storage systems and inverters.
Product description
51.2V 100Ah touch screen
Lithium Battery Pack Advantages
● Touch screen design, BYD C47 battery, cycle ≥6000
● Battery metal bracket, to ensure the battery flat
● Support appearance and cover customization, LOGO and color
● Built-in BMS, with battery voltage, current, temperature and health management
● Packing with single cell container, fire retardant wire and laser welding, stable and safe
● Support communicate with solar inverter bu CAN or RS485
51.2V 100Ah touch screen
Lithium Battery Pack Advantages
| Item | Specification | Notes | |
| Typical Capacity | 100Ah | 0.2C charge and discharge for cut-off voltage | |
| Minimum Capacity | 98Ah | ||
| Initial Impedance | Pack ≤120mΩ | After standard charge,AC1KHz test | |
| Weight | Approx：45KG | ||
| Nominal voltage | 51.2V | ||
| Charge limit voltage | 58.4V | ||
| Discharge cut-off voltage | 43.2V | ||
| Standard charge current | 50A | 00C~450C | |
| Maximum charge current | 100A | 100C~450C | |
| Standard discharge current | 50A | -100C~600C | |
| Maximum discharge current | 100A | 100C~600C | |
| Unit voltage | 45V-52V | 40%-60% | |
| Operating temperature | 00C~450C | Charging | |
| -200C~600C | Discharging | ||
| Storage temperature | -200C~ +600C | less than 1 month | Recommended storage temperature: 250C,at the shipment state |
| -100C~ 400C | less than 6 months | ||
| Recoverable capacity | Constant current 0.2C charge to 58.4V, then constant voltage 58.4Vcharge to current declines to 0.01C, rest for 10min,constant current 0.2C discharge to 43.2V,rest for 10min.Repeat above steps 3 times, recording the maximum capacity | ||
| Cycle Performance | Under the temperature of 23±20C,charge the battery with 0.2C, when the voltage reaches up to 58.4V charge with constant voltage until the charge current ≤0.02C,then stop charging, then rest for 0.5h, then discharge with 0.2C to 43.2V. Cycle with the above mode, when the continuous discharge time <3H stop cycling. The cycle life is required ≥6000 times. | ||
| Storage Humidity | ≤75% RH | ||
| Appearance | Without distortion and leakage | ||
| Standard testing condition | Temperature： 25±20C Humidity ：≤75%RH Atmospheric Pressure：86-106 Kpa | ||
YOU CAN CONTACT US IN THE FOLLOWING WAYS
You can submit your demand form in the following ways, and we will contact you as soon as possible
