Categories
51.2V 100ah 150Ah 200Ah lithium battery pack 5KWh Residential Energy Storage System
51.2V Residential solar battery storage，6000times deep cycle battery，solar panel inverter energy storage system
Product description
51.2V 100ah 150Ah 200Ah
lithium battery pack Advantages
The battery module consists of single LFP cells, wire, BMS and container.
● Built-in BMS, with battery voltage, current, temperature and health management
● LED indicate the battery SOC and operating status
● LCD Screen display the battery voltage, current, temp.,SOC detail information
● Support communicate with solar inverter bu CAN or RS485
● Update software by RS485 port
● Flexible customization of dimensions
● More than 5 years design life
51.2V 100ah 150Ah 200Ah
lithium battery pack specification
| Typical Capacity | 100Ah | 150Ah | 200Ah |
| Minimum Capacity | 98Ah | 148Ah | 195Ah |
| Initial Impedance | Pack ≤80mΩ | ||
| Weight | Approx：~75kG | Approx：~75kG | Approx：~85kG |
| Nominal voltage | 51.2V | ||
| Charge limit voltage | 58.4V | ||
| Discharge cut-off voltage | 43.2V | ||
| Standard charge current | 20A | ||
| Maximum charge current | 100A | ||
| Standard discharge current | 40A | ||
| Maximum discharge current | 100A | ||
| Unit voltage | 45V-52V | ||
| Operating temperature | 00C~450C | ||
| -100C~500C | |||
| Storage temperature | -100C~ +450C | ||
| -100C~ +350C | |||
| Recoverable capacity | Constant current 0.2C charge to 58.4V, then constant voltage 58.4Vcharge to current declines to 0.01C, rest for 10min,constant current 0.2C discharge to 43.2V,rest for 10min.Repeat above steps 3 times, recording the maximum capacity | ||
| Cycle Performance | Under the temperature of 23±20C,charge the battery with 0.2C, when the voltage reaches up to 58.4V charge with constant voltage until the charge current ≤0.02C,then stop charging, then rest for 0.5h, then discharge with 0.2C to 43.2V. Cycle with the above mode, when the continuous discharge time <3H stop cycling. The cycle life is required ≥6000 times. | ||
| Storage Humidity | ≤75% RH | ||
| Standard testing condition | Temperature： 25±20C Humidity ：≤75%RH Atmospheric Pressure：86-106 Kpa | ||
51.2V 100ah 150Ah 200Ah
battery pack Application
YOU CAN CONTACT US IN THE FOLLOWING WAYS
You can submit your demand form in the following ways, and we will contact you as soon as possible
